Thanks to the collaboration with designers Antonio Citterio and Toan Nguyen, Technogym Personal Line is the perfect synthesis between cutting-edge technology, innovative equipment and flawless design.

‍

Thanks to the unique design and the extensive library of digital training contents, Technogym Personal Line lets you live the best training experience while owning a unique piece of design, among:

‍

‍

• Run Personal
• Bike Personal
• Recline Personal
• Cross Personal
• Power Personal
• Kinesis Personal

‍

Let’s discover how to preserve the performance and features of your new Personal equipment, you just have to follow these guidelines.

‍

First of all, in order to preserve your equipment properly and to guarantee you a perfect and comfortable training experience, it is highly recommended to identify a space meeting with the following requirements:

‍

‍

• A temperature between + 10C and + 25C;
• Low levels of humidity; 
• Sufficient lighting, to make the area a safe 
• A flat and stable surface that can support the weight of both the product and the user

‍

Don’t use the equipment outdoors and don’t expose it to water, direct sunlight or humidity.

‍

In order to prevent technical issues and to maintain your Personal equipment, it is necessary to accurately verify its conditions and/or check for possible damages every two weeks, unplugging it beforehand.

In case of damaged or faulty components, it’s necessary to immediately replace them by contacting our Technical Assistance.

‍

Please, be sure to always maintain your product clean and dust-free, cleaning it regularly and after every use.

‍

To clean the screen, follow these simple steps:

‍

‍

1. Turn off the product by pressing the main switch to the “0” position. 
2. Take the product’s power plug out of the wall socket.
3. Clean the screen using a slightly humid cloth. 

‍

Clean the entire product once a week, as instructed below: 

‍

‍

1. Turn off the product by pressing the main switch to the “0” position. 
2. Take the product’s power plug out of the wall socket.
3. Clean external parts using a damp sponge and water. Then accurately dry it with a microfibre cloth.

‍

Don't use chemical products or solvents to clean the product and don’t use abrasive products or products that could scratch parts with a shiny finish.

‍

Clean the inferior part of the equipment and the underneath floor by moving the equipment Personal and using a vacuum cleaner on the area underneath.

‍