Who wouldn't love to have new shiny products all the time? Unfortunately, it's not always possible, especially when you've had your equipment for a while.
As it follows you can find simple instructions to follow to keep your

But don't worry: we got you covered. Just follow these simple precautions and you will able to maintain your MyRun bright new all the time.

‍

‍

‍

‍

‍

‍

Cleaning the display

‍

‍

To clean the display, proceed as follows:

‍

‍

1. Turn off the product by pressing the main switch to the position;
2. Take the product’s power plug out of the wall socket;
3. Clean the display, without pressing down, using a damp (not wet) cloth.

‍

‍

‍

‍

Cleaning the product

‍

‍

We suggest you to clean the entire product once a week, by following these simple steps:

‍

1. Turn off the product by pressing the main switch to the position;
2. Clean outer parts with a damp sponge;
3. Bring the running surface to the maximum gradient and clean the product's bottom casing and floor with a vacuum cleaner;
4. Allow the running surface to run idle and clean it with a nylon bristle brush or with a clean synthetic broom.

‍

If you followed all of these procedures correctly, your product should be ready to go!

Please keep in mind to do not use any chemical products or solvents. Do not use products that could scratch any parts with a shiny finish.